COSHH for road marking operatives
Overview
Duration
Minimum 1 day of 6 learning hours
Purpose/scope
The purpose of this course is to ensure road marking operatives have a relevant understanding of COSHH relating to the specialist materials used in the road marking industry.
The scope of this standard covers:
- a brief overview of the law
- definitions of hazard and risk
- explain the duties of the employer and the employee
- to demonstrate the difference between MSDS and a COSHH assessment
- establish the priorities of action when dealing with spills
- to explain the importance of recording evidence after a spill
- explain the correct manner of disposing of waste materials correctly
Note: Due to the specialist nature of the road marking industry and the materials used this standard aims to ensure operatives understand the inherent dangers and how to mitigate against spillages.
Occupational relevance
Training delivered against this standard would be relevant to the following occupational group(s):
- operative and craft.
Candidate pre-requisites
There are no candidate pre-requisites as part of this standard. However, knowledge of terminology and techniques of road marking activities would be beneficial.
Instruction/supervision
As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:
- a train the trainer or instructional techniques course certificate
- successfully completed training to this standard
- at least 2 years relevant industrial experience
- a verifiable CV.
Delivery
The following methods may be used in the delivery of this standard:
- classroom
All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.
The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.
This standard is considered to contain 51% or more theoretical training.
Assessment
For the successful completion of training, candidates must complete an end of course practical assessment and knowledge test that measures the learning outcomes and has a pass or fail criteria.
Quality assurance
Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.
CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.
Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk based analysis. They will also be visited annually by the CITB quality assurance team.
Renewal/refresher
Recommended Refresher
Approval date
November 2018
Review cycle
Either on request or in 3 years from approval date.
Learning outcomes
The candidate will be able to:
- A brief overview of the law
- Definitions of hazard and risk
- Explain the duties of the employer and the employee
- To demonstrate the difference between MSDS and a COSHH assessment
- Establish the priorities of action when dealing with spills.
- To explain the importance of recording evidence after a spill
- Explain the correct manner of disposing of waste materials correctly
Additional guidance to support learning outcome
- Classroom presentations
- Course handouts
- Case study and knowledge test.
Additional information
Health & Safety Executive (HSE)
- Control of Substances Hazardous to Health (COSHH)
- Working with substances hazardous to health. A brief guide to COSHH
- Safe use of work equipment (PUWER)
- Work related road safety
- Useful road related links
- Scottish Occupational Road Safety Alliance (ScORSA)
- Roadside precautions
- Risk assessment
- Workplace health, safety and welfare
- Workplace transport safety
- Parking
- A guide to workplace transport safety
- Vehicles at work
- Safe driving: loading & unloading
Legislation
http://www.legislation.gov.uk/
- The PPE at Work Regulations 1992
- Provision and Use of Work Equipment Regulations (PUWER ) (1998 UK 1999 NI)
- The Management of Health and Safety at Work Regulations 1999
- The Health and Safety at Work etc Act 1974
- The Workplace (Health, Safety and Welfare) Regulations 1992
- Health and Safety (Safety Signs and Signals) Regulations 1996
- Fire Precautions and Workplace Regulations 1997
- Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR ) 1995
Standards
- BS EN 1436:2007+A1:2008 Road marking materials. Road marking performance for road users
- BS EN 1424:1998 Road marking materials. Premix glass beads
- BS EN 1423:2012 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixes
- BS EN 1463-1:2009 Road marking materials. Retroreflecting road studs. Initial performance requirements
- BS EN 1463-2:2000 Road marking materials. Retroreflecting road studs. Road test performance spec’ns
- BS EN 1463-3. Road marking materials. Part 3. Active road studs
- BS EN 1790:2013 Road marking materials. Preformed road markings
- BS EN 1871:2000 Road marking materials. Physical properties
- BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications
- BS 3262-3:1989 Hot-applied thermoplastic road marking materials. Specification to apply to road surfaces
Government guides
Licensing
Highways
Tax MOT insurance
The Highway Code for England, Scotland and Wales
The Highway Code for Northern Ireland
Standards for Highways
Books and guides
How did we do today? Give feedback